What should be paid attention to in the maintenance and cleaning of the lens of the laser die cutting machine?Apr,11,2022
What should be paid attention to in the maintenance and cleaning of the lens of the laser die cutting machine?
What should be paid attention to in the maintenance and cleaning of the lens of the laser knife die machine? What should be paid attention to in the daily maintenance and cleaning of laser cutting machine lenses?
There are 3 mirrors and 1 focusing mirror on the laser die cutter (gantry type structure) (the No. 1 mirror is located at the emission exit of the laser tube, which is the upper left corner of the machine, the No. 2 mirror is located at the left end of the beam, the 3 The No. 1 reflector is located on the top of the fixed part of the laser head, and the focusing mirror is located in the adjustable lens barrel at the lower part of the laser head). The laser is reflected and focused by these mirrors and emitted from the laser head.
The lens is easily stained with dust or other contaminants, causing laser wear or damage to the lens. No. 1 and No. 2 lenses do not need to be removed when cleaning. Edge rotary wipe. The No. 3 lens and the focusing lens need to be taken out from the frame, wiped in the same way, and then put back as they are after wiping. (The structure of the cross slide does not consider so many reflections, it has only one mirror)
Matters needing attention: (It is recommended to clean before work every day, and the equipment must be turned off) 1. The lens should be wiped gently, and the surface coating should not be damaged; 2. The cleaning process should be handled with care to prevent falling; 3. Please be sure to install the focusing lens Keep the concave side down.